Guaranteed safe
& secure checkout
Pocket Powerbox (in short PPB) is suitable for the “grab and go” astrophotographer who does not want too much automation. Device can provide 10Amps of power, a sufficient number of 12V Outputs, Two Dew Heater Channels, A DSLR power output and an environmental sensor to monitor humidity and temperature.
A precise voltmeter measures and displays in real time your input voltage. If the input is more than 14V, the power is instantly cut off to protect your equipment.
A 8Volt Output is suitable to provide power to your DSLR or Mirrorless camera. We provide different battery couplers for Canon, Nikon, Sony, FUJI Cameras
Pocket Powerbox can work “out of the box” as a standalone device. Just plug the cables, setup the “autodew” functionality and every time you boot the device, it will retrieve your settings. So, If you don’t like to connect a PC every time, you don’t have to. Simple as that!
Two Pulse width modulation (PWM) outlets are capable to provide power to your “thirsty” Dew Heaters. No more moisture fuzzing your equipment and destroying your clear nights. These outlets can be remote controlled from your laptop using the supplied software.
Controller can auto adjust the heater power levels by consulting the environmental sensor Dew Point reading. Just click “Auto” and leave to Pocket Powerbox to decide if it is time to turn on and precise tune the level of your dew heaters.
Controller has been designed to support up to 10 Amps of total current.
Led can blink in patterns to warn you regarding important power issues (e.g over or under voltage). Moreover light can be turned off using the software. Our led is very dim but in case you don’t like it on you can switch it off via the software.
Pocket Powerbox has been design with a reverse voltage polarity protection. It will definitely save your night if you accidentally connect the main power supply in reverse polarity!
A hardware watchdog resets the device if for any reason there is no response from the controller for two seconds. A neat feature in the unlikely event of a controller freeze – when you have a remote observatory and you need to be certain that everything works as expected.
Device is firmware upgradable to support future features and bug fixes.
| Supply Voltage | 12V – 13.8V DC (Reverse Polarity Protected) |
| Power Input Connector | DC 2.1mm |
| Connectivity | USB2 – Type B USB Connector |
| 4 x 12 Outputs | Maximum Current 8 Amps in total. 2.1mm Center Positive Software: ON/OFF all ports |
| 2 Channel x 12 PWM Outputs | Maximum Current 5A Each, Black Colored RCA Connector, Pulse Width Modulated (Suitable for Dew Heaters or Flatbox)
Software: Duty Cycle % / OFF |
| 1x Sensor Input | Mini Stereo Socket, Connectivity with Environmental Sensor
0-100% humidity readings with 2-5% accuracy |
| Camera / DSLR Output | Max 1.5 Amps, 8Volt. 2.1mm Center Positive |
| Voltmeter | Measures 5 – 15V |
| Dimensions | 109mm x 74mm x 25mm |
| Weight | 250 grams |
